At that time (in 2007, wordpress 2.3), only Gengo was available.
During the last years, Gengo was unfortunately not maintained anymore, and it was difficult to upgrade Wordpress to new versions.

Recently we took the decision to upgrade our Wordpress installation, and at the same time ditch Gengo and start over using WPML, which is actively maintained (and looks superior to Gengo).

So, I started thinking about the conversion, then looked on the web and  found how to convert posts, with the help of those two blog posts:

• Migrating Wordpress from Gengo to WPML
• Converting Wordpress from Gengo to WPML – part 1

Those two posts were invaluable for the conversion of posts, but unfortunately nobody solved the conversion of translated categories… until I did

So here is the most complete recipe to convert from Gengo 2.5 to WPML 1.8, with updated and working SQL requests.

Pre-requisites

You might want to stop the traffic to your blog during all this procedure. One way to do that is to return an HTTP error code 503 by modifying your Apache/Nginx/Whatever configuration.

1. Log-in as an administrator in the Wordpress back-end, and deactivate Gengo.
2. Install WPML 1.8, and activates it to create the necessary tables. I had to massage WPML a little bit to let it create the tables, YMMV.
3. In the WPML settings, define the same languages as in Gengo (in my case English (primary), French and German)
4. Finish the WPML configuration.
5. If you had a define(WP_LANG,…) in your wordpress config, get rid of it.

Converting Posts

Connect to your MySQL server and issue the following revised SQL requests (thanks for the above blog posts for them):

Converting Pages

This is the same procedure, except we track ‘post_page’ instead of ‘post_post’:

Category conversion

This part is a little bit tricky. In Gengo, we translated the categories without creating new categories, but in WPML we have to create new categories that would be translations of a primary category.
To do this, I created the following SQL procedure that simplifies the creation of a translated category:

Then we need to create translated categories with this procedure (this can be done with the Wordpress admin interface, but if you have many categories it is simpler to do this with a bunch of SQL statements):

Bind translated categories to translated posts

And this is the last step, we need to make sure our posts translations have the correct translated categories (for the moment they use the English primary categories).

To do this, I created the following SQL request:

The request is in two parts. The first one will list all the French translations posts IDs that we will report in the second request to update the categories links.

Fortunately, most of this efficiency issues will be addressed in a subsequent major version (thanks to some of my patches and other refactorings).

Meanwhile it is interesting to work-around those bugs. Since most of us are running our masters as part of a more complete stack and not isolated, we can leverage the power of this stack to address some of the issues.

In this article, I’ll expose two techniques to help your overloaded masters to serve more and more clients.

Offloading file sourcing

I already talked about offloading file sourcing in a previous blog post about puppet memory consumption. Here the idea is to prevent our puppetmasters to read the whole content of files in memory at once to serve them. Most of the installation of puppetmasterd out there are behind an http reverse proxy of some sort (ie Apache or Nginx).

The idea is that file serving is an activity that a small static server is better placed to do than puppet itself (that might change when #3373 will be fully addressed). Note: I produced an experimental patch pending review to stream puppet file sourcing on the client side, which this tip doesn’t address.

So I did implement this in Nginx (which is my favorite http server of course, but that can be ported to any other webserver quite easily, which is an exercise left to the reader):

And if you use multiple module paths (for instance to separate common modules to other modules), it is still possible to use this trick with some use of nginx try_files directive.

The try_files directive allows puppet to try several physical path (the first matching one will be served), and if none match you can use the generic location that proxies to the master which certainly will know what to do.

Something that can be useful would be to create a small script to generate the nginx config from your fileserver.conf and puppet.conf. Since mine is pretty easy, I did it manually.

Optimize Catalog Compilation

The normal process of puppet is to contact the puppetmaster at some time interval asking for a catalog. The catalog is a byproduct of the compilation of the parsed manifests in which are injected the node facts. This operation takes some times depending on the manifest complexity and the server capacity or current load.

Most of the time an host requires a catalog while the manifests didn’t change at all. In my own infrastructure I rarely change my manifests once a kind of host become stable (I might do a change every week at most when in production).

Since 0.25, puppet is now fully RESTful, that means to get a catalog puppetd contacts the master under its SSL protected links and asks for this url:

In return the puppetmaster responds by a json-encoded catalog.
The actual compilation of a catalog for one of my largest host takes about 4s (excluding storeconfigs). During this 4s one ruby thread inside the master is using the CPU. And this is done once every 30 minutes, even if the manifests don’t change.

What if we could compile only when something changes? This would really free our masters!

Since puppet uses HTTP, it is easy to add a front-most HTTP cache in front of our master to actually cache the catalog the first time it is compiled and serve this one on the subsequent requests.

Although we can do it with any HTTP Cache (ie Varnish), this is really easy to add this with Nginx (which is already running in my own stack):

Puppet currently doesn’t return any http caching headers (ie Cache-Control or Expires), so we use nginx ability to cache despite it (see proxy_cache_valid). Of course I have a custom puppet branch that introduces a new parameter called –catalog_ttl which allows puppet to set those cache headers.

One thing to note is that the cache expiration won’t coincide with when you change your manifests. So we need some ways to purge the cache when you deploy new manifests.

With Nginx this can be done with:

• removing the nginx cache directory: rm -rf /var/cache/nginx/cache && killall -HUP nginx
• selectively purge with: the Nginx proxy cache purge module.

It’s easy to actually add one of those methods to any svn hook or git post-receive hook so that deploying manifests actually purge the cache.

Note: I think that ReductiveLabs has some plan to add catalog compilation caching directly to Puppet (which would make sense). This method is the way to go before this features gets added to Puppet. I have no doubt that caching inside Puppet will be much better than outside caching, mainly because Puppet would be able to expire the cache when the manifests change.

There a few caveats to note:

• any host with a valid certificate can request another cached catalog, unlike with the normal puppetmaster which makes sure to serve catalogs only to the correct host. It’s something that can be a problem for some configurations
• if your manifests rely on “dynamic” facts (like uptime or free memory), obviously you shouldn’t cache the catalog at all.
• the above nginx configuration doesn’t include the facts as part of the cache key. That means the catalog won’t be re-generated when any facts change and the cached catalog will always be served. If that’s an issue, you need to purge the cache when the host itself change.

I should also mention that caching is certainly not the panacea of reducing the master load.

Some other people are using clever methods to smooth out master load. One notable example is the MCollective puppet scheduler, R.I Pienaar has written. In essence he wrote a puppet run scheduler running on top of MCollective that schedule puppet runs (triggered through MCollective) when the master load is appropriate. This allows for the best use of the host running the master.

If you also have some tricks or tips for running puppet, do not hesitate to contact me (I’m masterzen on freenode’s #puppet or @_masterzen_ on twitter).

Still, I think there are some issues in term of scalability or resource consumption (CPU or memory), for which we can find some workarounds or even fixes. Those issues are not a symptom bad programming or bad design. No, most of the issues come either from ruby itself or some random library issues.

Let’s review the things I have been thinking about lately.

Memory consumption

This is by far one of the most seen issues both on the client side and the server side. I’ve mainly seen this problem on the client side, up to the point that most people recommend running puppetd as cronjobs, instead of being a long lived process.

Ruby allocator

All boils down to the ruby (at least the the MRI 1.8.x version) allocator. This is the part in the ruby interpreter that deals with memory allocations. Like in many dynamic languages, the allocator manages a memory pool that is called a heap. And like some other languages (among them Java), this heap can never shrink and always grows when more memory is needed. This is done this way because it is simpler and way faster. Usually applications ends using their nominal part of memory and no more memory has to be allocated by the kernel to the process, which gives faster applications.

The problem is that if the application needs transiently a high amount of memory that will be trashed a couple of millisecond after, the process will pay this penalty all its life, even though say 80% of the memory used by the process is free but not reclaimed by the OS.

And it’s even worst. The ruby interpreter when it grows the heap, instead of allocating bytes per bytes (which would be really slow) does this by chunk. The whole question is what is the proper size of a chunk?

In the default implementation of MRI 1.8.x, a chunk is the size of the previous heap times 1.8. That means at worst a ruby process might end up allocating 1.8 times more than what it really needs at a given time. (This is a gross simplification, read the code if you want to know more).

Yes but what happens in Puppet?

So how does it apply to puppetd?

It’s easy, puppetd uses memory for two things (beside maintaining some core data to be able to run):

1. the catalog (which contains all resources, along with all templates) as shipped by the puppetmaster (i.e. serialized) and live as ruby objects.
2. the content of the sourced files (one at a time, so it’s the biggest transmitted file that imposes it’s high watermark for puppetd). Of course this is still better than in 0.24 where the content was transmitted encoded in XMLRPC adding the penalty of escaping everything…

Hopefully, nobody distributes large files with Puppet If you’re tempted to do so, see below…

But again there’s more, as Peter Meier (known as duritong in the community) discovered a couple of month ago: when puppetd gets its catalog (which by the way is transmitted in json nowadays), it also stores it as a local cache to be able to run if it can’t contact the master for a subsequent run. This operation is done by unserializing the catalog from json to ruby live objects, and then serializing the laters to YAML. Beside the evident loss of time to do that on large catalog, YAML is a real memory hog. Peter’s experience showed that about 200MB of live memory his puppetd process was using came from this final serialization!

So I had the following idea: why not store the serialized version of the catalog (the json one) since we already have it in a serialized form when we receive it from the master (it’s a little bit more complex than that of course). This way no need to serialize it again in YAML. This is what ticket #2892 is all about. Luke is committed to have this enhancement in Rowlf, so there’s good hope!

Some puppet solutions?

So what can we do to help puppet not consume that many memory?

In theory we could play on several factors:

• Transmit smaller catalogs. For instance get rid of all those templates you love (ok that’s not a solution)
• Stream the serialization/deserialization with something like Yajl-Ruby
• Use another ruby interpreter with a better allocator (like for instance JRuby)
• Use a different constant for resizing the heap (ie replace this 1.8 by 1.0 or less on line 410 of gc.c). This can be done easily when using Rails machine GC patches or Ruby Enterprise Edition, in which case setting the environment variable RUBY_HEAP_SLOTS_GROWTH_FACTOR is enough. Check the documentation for more information.
• Stream the sourced file on the server and the client (this way only a small buffer is used, and the total size of the file is never allocated). This one is hard.

Note that the same issues apply to the master too (especially for the file serving part). But it’s usually easier to run a different ruby interpreter (like REE) on the master than on all your clients.

Streaming HTTP requests is promising but unfortunately would require large change to how Puppet deals with HTTP. Maybe it can be done only for file content requests… This is something I’ll definitely explore.

This file serving thing let me think about the following which I already discussed several time with Peter…

File serving offloading

One of the mission of the puppetmaster is to serve sourced file to its clients. We saw in the previous section that to do that the master has to read the file in memory. That’s one reason it is recommended to use a dedicated puppetmaster server to act as a pure fileserver.

But there’s a better way, provided you run puppet behind nginx or apache. Those two proxies are also static file servers: why not leverage what they do best to serve the sourced files and thus offload our puppetmaster?

This has some advantages:

• it frees lots of resources on the puppetmaster, so that they can serve more catalogs by unit time
• the job will be done faster and by using less resources. Those static servers have been created to spoon-feed our puppet clients…

In fact it was impossible in 0.24.x, but now that file content serving is RESTful it becomes trivial.

Of course offloading would give its best if your clients requires lots of sourced files that change often, or if you provision lots of new hosts at the same time because we’re offloading only content, not file metadata. File content is served only if the client hasn’t the file or the file checksum on the client is different.

An example is better than thousand words

Imagine we have a standard manifest layout with:

• some globally sourced files under /etc/puppet/files and
• some modules files under /etc/puppet/modules/<modulename>/files.

Here is what would be the nginx configuration for such scheme:

server {
    listen 8140;

    ssl                     on;
    ssl_session_timeout     5m;
    ssl_certificate         /var/lib/puppet/ssl/certs/master.pem;
    ssl_certificate_key     /var/lib/puppet/ssl/private_keys/master.pem;
    ssl_client_certificate  /var/lib/puppet/ssl/ca/ca_crt.pem;
    ssl_crl                 /var/lib/puppet/ssl/ca/ca_crl.pem;
    ssl_verify_client       optional;

    root                    /etc/puppet;

    # those locations are for the "production" environment
    # update according to your configuration

    # serve static file for the [files] mountpoint
    location /production/file_content/files/ {
        # it is advisable to have some access rules here
        allow   172.16.0.0/16;
        deny    all;

        # make sure we serve everything
        # as raw
        types { }
        default_type application/x-raw;

        alias /etc/puppet/files/;
    }

    # serve modules files sections
    location ~ /production/file_content/[^/]+/files/ {
        # it is advisable to have some access rules here
        allow   172.16.0.0/16;
        deny    all;

        # make sure we serve everything
        # as raw
        types { }
        default_type application/x-raw;

        root /etc/puppet/modules;
        # rewrite /production/file_content/module/files/file.txt
        # to /module/file.text
        rewrite ^/production/file_content/([^/]+)/files/(.+)$  $1/$2 break;
    }

    # ask the puppetmaster for everything else
    location / {
        proxy_pass          http://puppet-production;
        proxy_redirect      off;
        proxy_set_header    Host             $host;
        proxy_set_header    X-Real-IP        $remote_addr;
        proxy_set_header    X-Forwarded-For  $proxy_add_x_forwarded_for;
        proxy_set_header    X-Client-Verify  $ssl_client_verify;
        proxy_set_header    X-SSL-Subject    $ssl_client_s_dn;
        proxy_set_header    X-SSL-Issuer     $ssl_client_i_dn;
        proxy_buffer_size   16k;
        proxy_buffers       8 32k;
        proxy_busy_buffers_size    64k;
        proxy_temp_file_write_size 64k;
        proxy_read_timeout  65;
    }
}

EDIT: the above configuration was missing the only content-type that nginx can return for Puppet to be able to actually receive the file content (that is raw).

I leave as an exercise to the reader the apache configuration.

It would also be possible to write some ruby/sh/whatever to generate the nginx configuration from the puppet fileserver.conf file.

And that’s all folks, stay tuned for more Puppet (or even different) content.

What is mysql-snmp?

mysql-snmp is a mix between the excellent MySQL Cacti Templates and a Net-SNMP agent. The idea is that combining the power of the MySQL Cacti Templates and any SNMP based monitoring would unleash a powerful mysql monitoring system. Of course this project favorite monitoring system is OpenNMS.

mysql-snmp is shipped with the necessary OpenNMS configuration files, but any other SNMP monitoring software can be used (provided you configure it).

To get there, you need to run a SNMP agent on each MySQL server, along with mysql-snmp. Then OpenNMS (or any SNMP monitoring software) will contact it and fetch the various values.

Mysql-snmp exposes a lot of useful values including but not limited to:

• SHOW STATUS values
• SHOW ENGINE INNODB STATUS parsed values (MySQL 5.0, 5.1, XtraDB or Innodb plugin are supported)

Here are some graph examples produced with OpenNMS 1.6.5 and mysql-snmp 1.0 on one of Days of Wonder MySQL server (running a MySQL 5.0 Percona build):

This graph shows the number of SQL commands per unit of time

You can see the effect of MySQL bug #47991

Where to get it

mysql-snmp is available in my github repository. The repository contains a spec file to build a RPM and what is needed to build a Debian package. Refer to the README or the mysql-snmp page for more information.

Thanks to gihub, it is possible to download the tarball instead of using Git:

Mysql-snmp v1.0 tarball

Changelog

This lists all new features/options from the initial version v0.6:

• Spec file to build RPM
• Use of configuration file for storing mysql password
• Fix of slave handling
• Fix for mk-heartbeat slave lag
• Support of InnoDB plugin and Percona XtraDB
• Automated testing of InnoDB parsing
• Removed some false positive errors
• OpenNMS configuration generation from MySQL Cacti Templates core files
• 64 bits computation done in Perl instead of (ab)using MySQL
• More InnoDB values (memory, locked tables, …)

Reporting Issues

Please use Github issue system to report any issues.

Requirements

There is a little issue here. mysql-snmp uses Net-Snmp. Not all versions of Net-Snmp are supported as some older versions have some bug for dealing with Counter64. Version 5.4.2.1 with this patch is known to work fine.

Also note that this project uses some Counter64, so make sure you configure your SNMP monitoring software to use SNMP v2c or v3 (SNMP v1 doesn’t support 64 bits values).

Final words!

I wish everybody an happy new year. Consider this new version as my Christmas present to the community

Changes

Bonus in this new version, brought to you by Tizoc:

• JSONP support
• Long awaited fix for X-Progress-ID to be the last parameter in the request parameter

If you wonder what JSONP is (as I did when I got the merge request), you can check the original blog post that lead to it.

To activate JSONP you need:

1. to use the upload_progress_jsonp_output in the progress probe location
2. declare the JSONP parameter with the upload_progress_jsonp_parameter

This version has been tested with 0.7.64 and 0.8.30.

How do you get it?

Easy, download the tarball from the nginx upload progress module github repository download section.

If you want to report a bug, please use the Github issue section.

This version sees a crash fix and various new features implemented by Valery Kholodkov (the author of the famous Nginx Upload Module).

This version has been tested with Nginx 0.7.64.

Changes

• fixed segfault when uploads are aborted (thanks to Markus Doppelbauer for his bug report)
• session ID header name is now configurable (thanks to Valery Kholodkov)
• Added directive to format output as pure json (thanks to Valery Kholodkov)
• Added directive to format output with configurable template (thanks to Valery Kholodkov)
• Added directive to set a probe response content-type (thanks to Valery Kholodkov)
• Added upload status variables (needs a status patch) (thanks to Valery Kholodkov)

What’s now cool!

What is cool is that now with only one directive (upload_progress_json_output) the responses are sent in pure Json and not in javascript mix as it was before.

Another cool feature is the possibility to use templates to send progress information. That means with a simple configuration change nginx can now return XML:

upload_progress_content_type 'text/xml';
upload_progress_template starting '<upload><state>starting</state></upload>';
upload_progress_template uploading '<upload><state>uploading</state><size>$uploadprogress_length</size><uploaded>$uploadprogress_received</uploaded></upload>';
upload_progress_template done '<upload><state>done</state></upload>';
upload_progress_template error '<upload><state>error</state><code>$uploadprogress_status</code></upload>';

Refer to the README in the distribution for more information.

How do you get it?

Easy, download the tarball from the nginx upload progress module github repository download section.

How can I use it?

Normally you have to use your own client code to display the progress bar and contact nginx to get the progress information.

But some nice people have created various javascript libraries doing this for you:

• JQuery upload progress module

• Protoype upload progress module

Happy uploads!

The format of the event (an unconference with some scheduled talks in the morning) was really great. Everybody got a chance to enter or propose a discussion topic they care about. I could attend some development sessions about the Ruby DSL vs Parser DSL, Code smells, Puppet Provider/Type developments, Augeas, and so on…

Morning talks were awesome. I was presenting a talk about storeconfigs, called “All About Storeconfigs”. Puppet Storeconfigs is a feature where you can store nodes configuration and export/collect resources between nodes with the help of a database. I already talked about this in a couple of posts:

• Storeconfigs (advanced) use cases
• OMG!! storedconfigs killed my database!
• All about Puppet storeconfigs

You can enjoy the recording of the session (event though they cut the first part which is not that good), and have closer look to my slides here:

What’s great with those conferences in foreign countries is that you usually finish at the pub with some local people to continue to share Puppet (or not) experiences. Those parties were plenty of fun, so thank you everybody for this.

So thanks everybody and Reductive Labs team (especially Andrew who organized everything) for this event, and thanks to Days of Wonder for funding my trip!

If you are like me, then there is some hope in this blog post.

Last week-end, I did some intense Puppet hacking (certainly more news about this soon), and part of this work is two Nginx patch:

• The first one adds support for ssl_client_verify optional. In this mode nginx accepts a client without a certificate, and of course accepts a client as long as it verifies against the CA certificate.
• The second patch adds support for CRL PEM files (the one we usually deploy in Puppet).

Installation

First, download both patches:

• Support ssl_client_verify optional and $ssl_client_verify
• Add SSL CRL verifications

Then apply them to Nginx (tested on 0.7.59):

$ cd nginx-0.7.59
$ patch -p1 < ../0001-Support-ssl_client_verify-optional-and-ssl_client_v.patch
$ patch -p1 < ../0002-Add-SSL-CRL-verifications.patch

Then build Nginx as usual.

Usage

Here is a revised Puppet Nginx Mongrel configuration:

upstream puppet-production {
  server 127.0.0.1:18140;
  server 127.0.0.1:18141;
}

server {
  listen 8140;

  ssl                     on;
  ssl_session_timeout     5m;
  ssl_certificate         /var/lib/puppet/ssl/certs/puppetmaster.pem;
  ssl_certificate_key     /var/lib/puppet/ssl/private_keys/puppetmaster.pem;
  ssl_client_certificate  /var/lib/puppet/ssl/ca/ca_crt.pem;
  ssl_ciphers             SSLv2:-LOW:-EXPORT:RC4+RSA;
  # allow authenticated and client without certs
  ssl_verify_client       optional;
  # obey to the Puppet CRL
  ssl_crl /var/lib/puppet/ssl/ca/ca_crl.pem;

  root                    /var/tmp;

  location / {
    proxy_pass              http://puppet-production;
    proxy_redirect         off;
    proxy_set_header    Host             $host;
    proxy_set_header    X-Real-IP        $remote_addr;
    proxy_set_header    X-Forwarded-For  $proxy_add_x_forwarded_for;
    proxy_set_header    X-Client-Verify  $ssl_client_verify;
    proxy_set_header    X-SSL-Subject    $ssl_client_s_dn;
    proxy_set_header    X-SSL-Issuer     $ssl_client_i_dn;
    proxy_read_timeout  65;
  }
}

Reload nginx, and enjoy

For a project I’m working on at Days of Wonder, I had to use the nginx secure link module. This module allows a client to access to the pointed resource only if the given MD5 HashMAC matches the arguments.

Nginx current secure link module

To use it, it’s as simple as:

1. have your protected resources in /var/www/protected
2. have your back-end generate the correct url (see below)
3. use the following nginx config

location /protected/ {
secure_link "this is my secret";
root /var/www/downloads;

if ($secure_link = "") {
return 403;
}

rewrite ^ /$secure_link break;
}

To generate an URL, use the following PHP snippet:

<?php

$prefix = "http://www.domain.com/protected";

$protected_resource = "my-super-secret-resource.jpg";

$secret = "this is my secret";

$hashmac = md5( $protected_resource . $secret );

$url = $prefix . "/" . $hashmac . "/" . $protected_resource;

?>

I want my protected URL to expire

But that wasn’t enough for our usage. We needed the url to expire automatically after some time. So I crafted a small patch against Nginx 0.7.59.

How does it work?

It just extends the nginx secure link module with a TTL. The time at which the resource expires is embedded in the url, and the HMAC. If the server finds that the current time is greater than the embedded time, then it denies access to the resource.

The timeout can’t be tampered as it is used in the HMAC.

Usage

The usage is the same as the current nginx secure link module, except:

1. you need to embed the timeout into the URL
2. you need to tell nginx about the TTL.

On the back-end site

You need to use the following (sorry only PHP) code:

define(URL_TIMEOUT, 3600) # one hour timeout
$prefix = "http://www.domain.com/protected";
$protected_resource = "my-super-secret-resource.jpg";
$secret = "this is my secret";
$time = pack('N', time() + URL_TIMEOUT);
$timeout = bin2hex($time);

$hashmac = md5( $protected_resource . $time . $secret );

$url = $prefix . "/" . $hashmac . $timeout . "/" . $protected_resource;

On Nginx side

location /protected/ {
secure_link "this is my secret";
secure_link_ttl on;
root /var/www/protected;

if ($secure_link = "") {
return 403;
}

rewrite ^ /$secure_link break;
}

Caveat

The server generating the url and hashmac and the one delivering the protected resource must have synchronized clocks.

There is no support. If it eats your server, then I or Days of Wonder can’t be

I want it!

It’s simple:

1. download the nginx secure link ttl patch
2. apply it to nginx-0.7.59 source tree (patch -p0 < nginx-secure-link-ttl.patch)
3. configure nginx with –with-http_secure_link_module
4. use and abuse

The Recipe

Puppet side

Unfortunately Puppet creates its first certificate with a serial number of 0, which JRuby-OpenSSL finds invalid (in fact that’s Bouncy Castle JCE Provider). So the first thing is to check if you already have some certificate generated with a serial of 0. If you have none, then everything is great you can skip this.

You can see a certificate content with openssl:

% openssl x509 -text -in /path/to/my/puppet/ssl/ca/ca_cert.pem

Certificate:
Data:
Version: 3 (0x2)
Serial Number: 1 (0x1)
Signature Algorithm: sha1WithRSAEncryption
Issuer: CN=ca
Validity
Not Before: May 23 18:38:19 2009 GMT
Not After : May 22 18:38:19 2014 GMT
Subject: CN=ca
...

If no certificate has a serial of 0, then it’s OK, otherwise I’m afraid you’ll have to start the PKI from scratch (which means rm -rf $vardir/ssl and authenticate clients again), after applying the following Puppet patch:

JRuby fix: make sure certificate serial > 0

JRuby OpenSSL implementation is more strict than real ruby one and
requires certificate serial number to be strictly positive.

Signed-off-by: Brice Figureau <brice-puppet@daysofwonder.com>

diff --git a/lib/puppet/ssl/certificate_authority.rb b/lib/puppet/ssl/certificate_authority.rb
index 08feff0..4a7d461 100644
--- a/lib/puppet/ssl/certificate_authority.rb
+++ b/lib/puppet/ssl/certificate_authority.rb
@@ -184,7 +184,7 @@ class Puppet::SSL::CertificateAuthority
# it, but with a mode we can't actually read in some cases.  So, use
# a default before the lock.
unless FileTest.exist?(Puppet[:serial])
-            serial = 0x0
+            serial = 0x1
end

Puppet.settings.readwritelock(:serial) { |f|

I’ll post this patch to puppet-dev soon, so I hope it’ll eventually get merged soon in mainline.

JRuby

You need the freshest JRuby available at this time. My test were conducted with latest JRuby as of commit “3aadd8a”. The best is to clone the github jruby repository, and build it (it requires of course a JDK and Ant, but that’s pretty much all).

Then install jruby in your path (if you need assistance for this, I’m not sure this blog post is for you )

JRuby-OpenSSL

As I explained in my previous blog post about the same subject, Puppet exercises a lot the Ruby OpenSSL subsystem. During this experiment, I found a few shortcomings in the current JRuby-OpenSSL 0.5, including missing methods, or missing behaviors needed by Puppet to run fine.

So to get a fully Puppet enabled JRuby-OpenSSL you need either to get the very latest JRuby-OpenSSL from its own github repository (or checkout the puppet-fixes branch of my fork of said repository on github) and or apply manually the following patches on top of the 0.5 source tarballs:

• JRUBY-3689: OpenSSL::X509::CRL can’t be created with PEM content
• JRUBY-3690: OpenSSL::X509::Request can’t be created from PEM content
• JRUBY-3691: Implement OpenSSL::X509::Request#to_pem
• JRUBY-3692: Implement OpenSSL::X509::Store#add_file
• JRUBY-3693: OpenSSL::X509::Certificate#check_private_key is not implemented
• JRUBY-3556: Webrick doesn’t start in https
• JRUBY-3694: Webrick HTTPS produces some SSL stack trace

Then rebuild JRuby-OpenSSL which is a straightforward process (copy build.properties.SAMPLE to build.properties, adjust jruby.jar path, and then issue ant jar to build the jopenssl.jar).

Once done, install the 0.5 JRuby-OpenSSL gem in your jruby install, and copy other the built jar in lib/ruby/gems/1.8/gems/jruby-openssl-0.5/lib.

Let’s try it!

Then it’s time to run your puppetmaster, just start it with jruby instead of ruby. Of course you need the puppet dependencies installed (Facter).

My next try will be to run Puppet on Jruby and mongrel (or what replaces it in JRuby world), then try with storeconfig on…

Hope that helps, and for any question, please post in the puppet-dev list.